Netopia 435 Reference Manual page 123

6-10 Netopia ISDN Router Reference Guide
Corporate models
To view the zones available to EtherTalk Phase ll, select Show
Zones and press Return. You can dismiss the list of zones by
pressing the Return or Escape key.
EtherTalk Phase II Enabled:
Show Zones...
Enter New Zone Name:
Delete Zone Name...
Set Default Zone...
Net Low:
Net Hi:
Seeding...
Up/Down Arrow Keys to select, ESC to dismiss.
To remove zones from the list, select Delete Zone Name and
press Return to see the zones list. Use the Up and Down Arrow
keys to select the zone to delete. Press the Return key to
delete it and exit the list. Press the Escape key to exit the list
without deleting any zones.
Select Set Default Zone to choose a different default zone.
This is the zone where Netopia's EtherTalk Phase II port
appears to other AppleTalk nodes. The default zone is also
where new AppleTalk nodes will appear. If you do not set the
default zone name, it will be called Unnamed, the factory
default.
EtherTalk Phase II Setup
+---------ET II Zone List----------+
+----------------------------------+
| Unnamed
|
|
|
|
|
|
|
|
|
|
|
+----------------------------------+
|
|
|
|
|
|
|
|
|
|
|
|