Connecting To An Ip And Telephone Network - Netopia 4741 2A4NA Administration Manual

Connecting to an IP and Telephone Network

The Netopia 4741 supports Ethernet connections through its Ethernet port. You can connect a standard 10 or
100Base-T Ethernet network to the Netopia 4741 using its Ethernet port.
Netopia 4741 back panel
1 2 3 4
Add computers by connecting
them to an Ethernet hub and
connecting the hub to the Ethernet
port on the Netopia 4741. Add
telephones or fax machines by
connecting them directly to the
telephone extension ports on the
Netopia 4741.
Note: The Ringer Equivalence Number (REN) is used to determine how many devices can be connected to your
telephone line. In most areas, the sum of the REN's of all devices on any one line should not exceed two (2.0).
If too many devices are attached, they many not ring properly. The REN for telephone devices is usually listed on
the product label or stamped or moulded into the body of the device.
Telephone
Extensions
Connecting to Your Local Network 4-3
10/100
DSL
Ethernet
10/
1 2 3 4 Tel D Co
Console Power
Po