Localtalk - Netopia 435 Reference Manual

Netopia Corporate models
You can also set the range of EtherTalk Phase II network
numbers. Select Net Low and enter the lower limit of the
network number range. Select Net High and enter the upper
limit of the range.
Select the Seeding pop-up menu and choose the seeding
method for Netopia to use.
You have finished configuring EtherTalk Phase II.

LocalTalk

The Netopia ISDN Router can function as a LocalTalk to EtherTalk
router. This means that a LocalTalk network can be connected to the
Netopia's LocalTalk port. You can enable this feature by configuring
the Netopia's LocalTalk port.
Select LocalTalk Setup in the AppleTalk Setup screen and press
Return to the LocalTalk Routing Setup screen.
LocalTalk Routing Setup
LocalTalk Enabled:
LocalTalk Zone Name:
LocalTalk Net Number:
Seeding...:
Use this screen to set up the LocalTalk Port Routing attributes.
If you are using LocalTalk with the Netopia ISDN Router, select
LocalTalk Enabled and make sure LocalTalk is set to On, which
is the default.
AppleTalk Setup
On
Unnamed
0
Soft-Seeding
6-11