Netopia 435 Reference Manual page 129

6-16 Netopia ISDN Router Reference Guide
To add the new AURP partner, select ADD PARTNER NOW. To
discard the new AURP partner, select CANCEL.
Modifying an AURP partner
To modify an AURP partner, select Change Partner in the AURP
Setup screen and press Return to display a table of existing
partners.
Use the Up and Down Arrow keys to select a partner, then
press Return to go to the Change AURP Partner screen.
Deleting an AURP partner
To delete an AURP partner, select Delete Partner in the AURP
Setup screen and press Return to display a table of existing
partners.
Use the Up and Down Arrow keys to select an AURP partner,
then press Return to delete it. Press the Escape key to exit
without deleting a partner.
Receiving AURP connections
To control the acceptance of incoming AURP tunnels, select
Accept Connections From and choose Anyone or Configured
Partners Only from the pop-up menu. If you choose Anyone, all
incoming AURP connections will be accepted.
The more secure option is Configured Partners Only, which
only accepts connections from recognized AURP partners (the
ones you have set up).