Netopia 435 Reference Manual page 111

5-20 Netopia ISDN Router Reference Guide
To modify any of the filter sets in the list, select the desired filter set
and go to the Change SAP Filter Set screen. The parameters in this
screen are the same as the ones in the Add SAP Filter Set screen
(see the previous section).
Adding a SAP filter set
To add a new IPX SAP filter set, select Add IPX SAP Filter Set in the
IPX Filters and Filter Sets screen and go to the Add SAP Filter Set
screen.
Filter Set Name:
Show Filters/Change Action on Match...
Append Filter...
Detach Filter...
ADD FILTER SET NOW
Return accepts * ESC cancels * Left/Right moves insertion point * Del
deletes.
Modify an IPX SAP filter here. Changes are immediate.
Follow these steps to configure the new SAP filter set:
1. Select Filter Set Name and enter a descriptive name for the
filter set.
2. To change the forwarding action of filters in the filter set, select
Show Filters/Change Action on Match and press Return to go
to the Show Filters/Change Actions on Match screen.
Add SAP Filter Set
CANCEL