Table of Contents
Advertisement
10-2
Netopia ISDN Router Reference Guide
Resetting the system
Main
Menu
Note: The format in which date and time are displayed is
dependent on the current ISDN switch protocol. The switch protocol
can be set in the Netopia ISDN Router's ISDN Line Configuration
screen. Changing the switch protocol may change the date and time
format, as well as the appearance of the Set Date and Time screen.
When configuring the items in the Set Date and Time screen, you
must follow the correct format. See
Formats,"
to find the correct date and time format for your switch
protocol setting.
Follow these steps to set the system's date and time:
1.
Select Current Date and enter the date in the appropriate
format. Use one- or two-digit numbers for the month and day,
and the last two digits of the current year. The date's numbers
must be separated by forward slashes (/).
2.
Select Current Time and enter the time in the format HH:MM,
where HH is the hour (using either the 12-hour or 24-hour clock,
depending on your switch protocol) and MM is the minutes.
3.
Select AM or PM and choose AM or PM. The AM or PM item
appears only if the time is in the 12-hour clock format.
Statistics,
. U tilities,
Tests
You can reset the system by selecting the Restart System item in
the Statistics, Utilities, Tests screen.
Appendix B, "Date and Time
Set Date and Time
Current Date:
Current Time:
AM or PM:
Restart
System
10/03/1995
05:59
PM
Advertisement
Table of Contents
