Netopia 435 Reference Manual page 168

Inbound:
Directory Number 1 Connection:
Directory Number 2 Connection:
Outbound:
Phone 1 Connection:
Phone 1 Service Grade:
Phone 2 Connection:
Phone 2 Service Grade:
Follow these steps to configure the Telephone Connections screen:
1. Select Inbound Directory Number 1 Connection, and press
Return. A pop-up menu displays a list of options.
2. Select Reject as Busy to block the call, issuing a busy tone to
the party trying to dial in.
Select Phone 1 to direct calls out the Router's Phone 1 jack,
thereby ringing the phone or device plugged into that jack.
Select Phone 2 to direct calls out the Router's Phone 2 jack.
Select Phone 1 & Phone 2 to ring all devices connected to the
Phone 1 and Phone 2 jacks.
Select Router to direct the incoming call, usually a
data-over-voice call with a speech or 3.1 kHz service, internally
for the Router's use.
3. Select Inbound Directory Number 2 Connection, press Return,
and configure as described in step 2 above. If no number has
been entered for Directory Number 2 in the initial configuration,
the options you select will be stored but will not work.
Telephone Services
Telephone Connections
+--------------------+
+--------------------+
| Reject as Busy
| Phone 1
| Phone 2
| Phone 1 & Phone 2
| Router
+--------------------+
Speech
8-3
|
|
|
|
|