Aurp Setup - Netopia 435 Reference Manual

Corporate models

AURP setup

AppleTalk Update-Based Routing Protocol (AURP) allows AppleTalk
networks to communicate across an IP network. Your local AppleTalk
networks (connected to the Netopia ISDN Router) can exchange
data with remote AppleTalk networks that are also connected to an
AURP-capable router.
When two networks using AppleTalk communicate with each other
through a network based on the Internet Protocol, they are said to
be tunneling through the IP network. The Netopia ISDN Router uses
AURP to allow your AppleTalk network to tunnel to designated
AppleTalk partner networks, as well as to accept connections from
remote AppleTalk networks tunneling to your AppleTalk LAN.
To set up AURP, select AURP Setup in the AppleTalk Setup screen
and press Return.
AURP Enable:
Show Partners...
Add Partner...
Change Partner...
Delete Partner...
Accept Connections From...
AURP Options...
AURP Allows you to connect remote AppleTalk Networks across IP.
AppleTalk Setup
AURP Setup
Off
Configured Partners Only
6-13