Table of Contents
Advertisement
9-16
Netopia ISDN Router Reference Guide
The SNMP Setup screen
To go to the SNMP Setup screen, select SNMP in the Advanced
Configuration screen.
System Name:
System Location:
System Contact:
Read-Only Community String:
Read/Write Community String:
Auth. Traps Enable:
IP Trap Receivers...
DDP (AppleTalk) Trap Receivers...
Follow these steps to configure the first three items in the screen:
1.
Select System Name and enter a descriptive name for the
Netopia ISDN Router's SNMP agent.
2.
Select System Location and enter the router's physical location
(room, floor, building, etc.).
3.
Select System Contact and enter the name of the person
responsible for maintaining the router.
System Name, System Location, and System Contact set the
values returned by the Netopia ISDN Router SNMP agent for the
SysName, SysLocation, and SysContact objects, respectively, in the
MIB-II system group. Although optional, the information you enter in
these items can help a system administrator manage the network
more efficiently.
SNMP Setup
public
private
Off
Advertisement
Table of Contents
