Netopia 435 Reference Manual page 109

5-18 Netopia ISDN Router Reference Guide
Viewing and modifying SAP filters
To display a table of IPX SAP filters, select Show/Change IPX SAP
Filters in the IPX Filters and Filter Sets screen.
To modify any of the filters in the table, select the desired filter and
press Return to go to the Change SAP Filter screen. The parameters
in this screen are the same as the ones in the Add SAP Filter screen
(see the next section).
Adding a SAP filter
To add a new IPX SAP filter, select Add IPX SAP Filter in the IPX
Filters and Filter Sets screen and press Return to go to the Add SAP
Filter screen.
Filter Name:
Server Name:
Socket:
Type:
IPX Network:
IPX Node Address:
ADD FILTER NOW
Return accepts * ESC cancels * Left/Right moves insertion point * Del
deletes.
Configure a new IPX SAP Filter. Finished?
By default, the filter's socket and type numbers and network and
node addresses are null (all zeros). This sets the filter to match on
any IPX SAP packet entry. You should configure the filter using
criteria that meet your needs.
Follow these steps to configure the new SAP filter:
1. Select Filter Name and enter a descriptive name for the filter.
Add SAP Filter
0000
0000
00000000
000000000000
ADD or CANCEL to exit.
CANCEL