Appletalk Setup For Corporate Models - Netopia 435 Reference Manual

Corporate models

AppleTalk Setup for Corporate Models

To go to the AppleTalk Setup options screen, select Network
Protocols Setup and then select AppleTalk Setup in the Advanced
Configuration screen.
Note: If you have completed Easy Setup, the information you have
already entered will appear in the AppleTalk Setup options screen.
EtherTalk Phase II Setup...
LocalTalk Setup...
AURP Setup...
Return/Enter to configure the EtherTalk Phase II Router port.
Navigate from here to configure AppleTalk Routing and Tunnelling.
Follow these steps to configure AppleTalk Setup:
In the AppleTalk Setup screen, select EtherTalk Phase ll Setup
and press Return.
If you are using EtherTalk Phase ll on the Ethernet network
connected to Netopia ISDN Router, select EtherTalk Phase ll
Enabled and toggle it to On.
AppleTalk Setup
AppleTalk Setup
6-9