Isdn Problems - Netopia 435 Reference Manual

A-2 Netopia ISDN Router Reference Guide
Characters are missing from some of the configuration screens
Try changing the Netopia ISDN Router's default speed of 9.6
kbps and setting your terminal emulation software to match the
new speed.

ISDN problems

The Ready LED is blinking orange
This is an indication that the Netopia ISDN Router cannot detect the
ISDN switch at your ISDN service provider's central office.
Check that the cable you are using for ISDN is not a 10Base-T
cable, which can look similar to an ISDN cable.
Check that you have plugged the correct cable into the Netopia
ISDN Router's ISDN port, and not one of its EtherWave ports.
The Ready LED is solid orange
This is an indication that the Netopia ISDN Router is unable to
synchronize with the switch at your ISDN service provider's central
office.
Confirm that you have entered the correct directory numbers
when configuring the Router.
Confirm that you have configured the Router with the correct
ISDN switch protocol. The protocol selected should match the
one used on your ISDN line.
Try using the Router's ISDN loopback test. See
loopback test" on page 10-3
ISDN loopback test.
Check the ISDN event history to see what error it reports. You
can select any event shown in the history and press Return to
see more information on that event.
"The ISDN
for more information on using the