Netopia 435 Reference Manual page 158

Modifying filters
To modify a filter, select Change Input Filter (Change Output Filter) in
the Add Filter Set screen to display a table of filters.
Select a filter from the table and press Return to go to the Change
Filter screen. The parameters in this screen are the same as the ones
in the Add Filter screen (see
page 7-23).
Enabled:
Forward:
Source IP Address:
Source IP Address Mask:
Dest. IP Address:
Dest. IP Address Mask:
Protocol Type:
Source Port Compare...
Source Port ID:
Dest. Port Compare...
Dest. Port ID:
Enter the IP specific information for this filter.
Deleting filters
To delete a filter, select Delete Input Filter (Delete Output Filter) in
the Add Filter Set screen to display a table of filters.
Select the filter from the table and press Return to delete it. Press the
Escape key to exit the table without deleting the filter.
"Adding filters to a filter set" on
Change Filter
No
No
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0
No Compare
0
No Compare
0
Security 7-25