Setting The Ip Trap Receivers - Netopia 435 Reference Manual

9-18 Netopia ISDN Router Reference Guide
A cold start trap is generated after the router is reset.
An interface down trap (known as ifDown in SNMP jargon) is
generated when one of the router's interfaces, such as a port,
stops functioning or is disabled.
An interface up trap (known as ifUp in SNMP jargon) is
generated when one of the router's interfaces, such as a port,
begins functioning.
The Netopia ISDN Router sends traps using UDP (for IP networks).

Setting the IP trap receivers

You can specify which SNMP managers are sent the IP traps
generated by the Netopia ISDN Router. Up to eight receivers can be
set.
To go to the IP Trap Receivers screen, select IP Trap Receivers in
the SNMP Setup screen.
Show IP Trap Receivers...
Add IP Trap Receiver...
Change IP Trap Receiver...
Delete IP Trap Receiver...
Viewing IP trap receivers
To display a view-only table of IP trap receivers, select Show IP Trap
Receivers in the IP Trap Receivers screen.
IP Trap Receivers