Netopia 435 Reference Manual page 68

10.0.0.5 to a Windows 95 PC
3. Create a connection profile for your ISP or other remote net-
work. See "Adding a connection profile" on page
Profile Parameters screen, toggle Address Translation Enabled
to Yes, to turn on NAT for this profile.
4. When your Netopia ISDN Router calls the ISP, the remote router
that answers the call assigns your Netopia ISDN Router an IP
address that external users use to communicate with your net-
work. To view this address, go to the QuickView menu and
check More Info in the Current ISDN Connection Status section
of the profile.
In the following example screen, 192.163.100.6 is assigned to
the calling Netopia ISDN Router.
Ethernet Address -- 00-00-c5-60-04-6b Current Date -- 11/20/96 09:56:49 AM
Firmware Version -- 2.0
IP Address -- 10.0.0.1
IPX Network Address -- 00000000
Profile Name-------State-%Use-Remote Address-----Est.-More Info-----
ISP B1
-----ETHERNET----+---B1---SWITCH----B2-+-CARD-+-PWR +-----LEDS-------
LNK LNK TX COL AUI RX CON
O - - - - - O
Internal users can access the Internet as they always do; the
external Internet, however, views all traffic that the computers
generate on the internal network as originating from
192.163.100.6. Similarly, all traffic your network receives is
addressed to 192.163.100.6.
Quick View
Last Cfg Access --
AppleTalk EN Address -- 32983:150
AppleTalk EN Address -- 32982:149
Current ISDN Connection Status
10 IP 192.163.4.1
LED Status
SYNC TX RX CON
O - - - -
IP Setup 4-3
2-9. In the IP
Lcl NAT 192.163.100.6
|'-'= Off 'E'= Error
O |'O' = On '*'= Blink