Adding A Filter Set - Netopia 435 Reference Manual

7-20 Netopia ISDN Router Reference Guide
To go to the Filter Sets screen, select Filter Sets (Firewalls) in the
Advanced Configuration screen.
Filter Sets
Display Filter Sets...
Add Filter Set...
Change Filter Set...
Delete Filter Set...
Set Up Filter Sets (Firewalls) from this and the following Menus.
The basic procedure for creating and maintaining filter sets is as
follows:
1. Add a new filter set.
2. Create the filters for the new filter set.
3. View, change, or delete individual filters and filter sets.
The sections below explain how to execute these steps.
Adding a filter set
You can create up to eight different custom filter sets. Each filter set
can contain up to 16 output filters and up to 16 input filters.
To add a new filter set, select Add Filter Set in the Filter Sets screen
and press Return to go to the Add Filter Set screen.
Note: There are two groups of items in the Add Filter Set screen, one
for input filters and one for output filters. The two groups work in
essentially the same way, as you'll see below.