Transport And Storage; Conditions - Beckhoff AMI8100 Operating Instructions Manual

Transport and storage

Conditions

6.1
32 ───
Avoid damage to the servo drives and loss of guarantee
Observe the conditions and the following chapters on transport and
storage.
Failure to observe the conditions may result in damage to the servo
drives and void the warranty.
Do not remove the yellow protective cap
Do not remove the yellow protective cap on the drive shaft.
The protective cap protects against mechanical damage and envi-
ronmental influences. If you remove the protective cap, the shaft
may be damaged.
During transport and storage ensure that the servo drives and indi-
vidual components are not damaged. Observe the specifications in
the following chapters and comply with the following conditions:
• Climate category: 2K3 according to EN 60721
• Temperature: -25 °C to +70 °C, maximum fluctuation 20 K per
hour
• Humidity: relative humidity 5 % to 95 %, no condensation
• Use of suitable means of transport
• The device should be transported and stored in a horizontal po-
sition
• Use of the vendor's original packaging
The table shows the maximum stacking height at which you may
store and transport the servo drives on a pallet in the original pack-
aging:
Motor type
AMI812x
AMI8100
Stacking height [pieces]
10
Version: 1.0