Final Product Requirements; Rdl-3000-Rmc; Rdl-3000-Rmc Frequency Bands; Rdl-3000-Rmc Antenna Use And Transmit Power - Redline RDL-3000 Series Product Manual

RDL-3000 RMC/E/F MODULE
4

Final Product Requirements

The following requirements apply to all final products incorporating an RDL-3000-RMC,
RDL-3000-RME, or RDL-3000-RMF module.

4.1 RDL-3000-RMC

4.1.1 RDL-3000-RMC Frequency Bands

Operation of the final product requires a software 'key' that is available exclusively from
Redline. This key restricts device operation to the FCC/IC 4940-4990 MHz, 5250-5350
MHz, 5470-5725 MHz, or 5725-5850 MHz band. The professional installer and operator
can not modify or otherwise circumvent these operational restrictions.

4.1.2 RDL-3000-RMC Antenna Use and Transmit Power

The RDL-3000-RMC module supports operation with 2x2 MIMO antenna systems with
two transmit chains and two receive chains. The RDL-3000-RMC module must be used
only with certified antennas and using the channel size and output power level specified
by the FCC/IC regulations.

4.1.3 RDL-3000-RMC Certified Antennas

This device has been designed to operate with the antennas listed in the following table.
Any additional antennas will be used only after authorization is obtained through Class II
permissive change.

Table 1: Approved Antennas

Manufacturer
Redline
Redline
L-Com
70-00184-03-02
Part #
A3FT3204LTPD
30-00328-00
HG5158DP-10U
Proprietary Redline Communications © 2013
PRODUCT MANUAL
Gain (dBi)
32
19
10
Page
Frequency Range
4900-5875 MHz
4900-5875 MHz
5100-5800 MHz
9 of 50 April 30, 2013