Air Box Removal / Installation - Polaris ACE 900 2017 Service Manual

AIR BOX REMOVAL / INSTALLATION

IMPORTANT
Make sure the air box cover is properly seated upon
installation or severe engine damage could occur.
Air Box Removal Procedure
1. Remove the cargo box access panel.
2. Loosen the gear clamps
3. Disengage the two air box cover straps
4. Unlatch the cover and carefully remove it from the air
box.
5. Remove the seat.
6. Remove the engine compartment access panel.
7. Remove the four screws inside the cargo box.
9929422 R02 - 2017-2019 ACE 900 Service Manual
© Copyright Polaris Industries Inc.
8. Remove the three screws
cargo box.
9. With the front of the cargo box loose access the two
screws securing the air box by lifting the cargo box
up.
10. Remove the two screws
q
.
11. Remove the air box.
FUEL SYSTEM
q
fastening the front of the
w
fastening the air box.
4.29
4