Polaris ACE 900 2017 Service Manual page 321

14. Loosen and remove the lower A-arm front through-
t
bolt fastener and rear through-bolt fastener
15. Remove lower shock fastener
16. Using a soft faced hammer, lightly tap on the bearing
carrier while removing the upper joint end.
17. Remove the bearing carrier and lower A-arm from the
front drive shaft.
9929422 R02 - 2017-2019 ACE 900 Service Manual
© Copyright Polaris Industries Inc.
18. With a short, sharp jerk, remove drive shaft from the
y
.
u
from lower A-arm. 19. Remove the bolts securing the front gearcase to the
20. With the front gearcase loose in the frame, remove
front gearcase.
frame.
the left front driveshaft from the gearcase. Remove
the gearcase assembly from the right side of the
vehicle.
FINAL DRIVE
7
7.31