Polaris ACE 900 2017 Service Manual page 306

FINAL DRIVE
10. Install new brake caliper mounting bolts and torque to
specification.
TORQUE
Front Caliper Mounting Bolts:
30 ft-lbs (54 Nm)
CAUTION
New bolts have a pre-applied locking agent which is
destroyed upon removal. Always use new brake caliper
mounting bolts upon assembly.
11. Install the steering tie rod end
bearing carrier.
Refer to the photo below to ensure proper placement of
the tie rod end.
12. Torque the tie rod end fastener
install a new cotter pin
TORQUE
Tie Rod End Fastener:
42 ft-lbs (57 Nm)
7.16
y
onto the front
NOTE
u
to specification and
i
.
13. Torque wheel hub nut
a
new cotter pin . Tighten nut slightly if necessary to
align cotter pin holes. Bend both ends of cotter pin
around end of spindle in different directions.
TORQUE
Wheel Hub Castle Nut:
110 ft-lbs (149Nm)
14. Install wheel and four wheel nuts. Torque wheel nuts
to specification.
TORQUE
Aluminum Wheels:
30 ft-lbs + 90° (41 Nm)
15. Rotate wheel and check for smooth operation.
9929422 R02 - 2017-2019 ACE 900 Service Manual
o
to specification and install a
© Copyright Polaris Industries Inc.