Polaris ACE 900 2017 Service Manual page 110

ENGINE / COOLING SYSTEM
15. Disconnect the following electrical components:
a
ETC
s
TMAP
d
Engine Temperature
Sensor
f
CPS
16. Remove the three fasteners
by the transmission switch and two fasteners
retaining the taillight harness wires to the frame.
17. Remove the three harness clamps
manifold. Move the main harness out of the way
towards the seat.
18. Disconnect the two fuel rail mounting bolts and move
the fuel rail off to the driver's side.
Be careful not to pinch or kink the fuel rail.
3.34
g
Transmission Switch
h
Speed Sensor
Diff Relay (if equipped)
j
retaining the harness
l
on the intake
NOTE
19. Remove the four fasteners
manifold to the engine and the one
bottom of the intake manifold to the transmission
bracket.
k
20. Remove the PVT outer cover.
21. Remove the belt and driven clutch.
9929422 R02 - 2017-2019 ACE 900 Service Manual
1 (
retaining the intake
2)
retaining the
© Copyright Polaris Industries Inc.