Polaris ACE 900 2017 Service Manual page 268

TRANSMISSION
19. Remove the spring pin
front gear case. Remove the propshaft from the
transmission output shaft.
20. If internal transmission repair is required, drain the
transmission lubricant.
21. Remove the outer clutch cover, drive belt, drive
clutch, driven clutch, inner clutch cover and clutch
outlet duct (see Clutching chapter).
22. Place a spacer or support between the vehicle frame
and engine to hold the engine in position.
6.12
2!
from the prop shaft at the
2@
23. Remove vent hose
24. Disconnect the shift lever cable from the shift lever on
the transmission.
25. Remove the wire
transmission and mounts.
26. Remove the black ground wire and red starter motor
lead from the starter motor. Remove the starter motor
from the engine. Pack the starter motor bore with a
clean shop towel to prevent foreign material from
entering engine.
9929422 R02 - 2017-2019 ACE 900 Service Manual
from transmission.
ties retaining harness
© Copyright Polaris Industries Inc.
to