Polaris ACE 900 2017 Service Manual page 109

9. Remove or disconnect the following components from
the cargo box brace.
t
Ignition Coil Fastener
y
Harness Retainers
10. Remove the cargo box brace fasteners
remove for vehicle.
11. Remove the spark plug caps.
9929422 R02 - 2017-2019 ACE 900 Service Manual
© Copyright Polaris Industries Inc.
u
Transmission Vent
Line
i
Heat Shield Push
Rivets
o
and
ENGINE / COOLING SYSTEM
12. Remove the four screws retaining the engine and
PVT intake vents. Loosen the PVT intake clamp.
Remove the two bolts mounting the air box to the
frame bracket and loosen the clamp on the air box
duct. Remove the air box from vehicle.
13. Remove the two bolts mounting the air box to the
frame bracket and loosen the clamp on the air box
duct. Remove the air box from vehicle.
14. Remove the four fasteners
support to the frame and remove it from the vehicle.
NOTE
The heat shield is retained to the airbox support and
can remain attached during removal.
3
o
securing the airbox
3.33