Polaris ACE 900 2017 Service Manual page 154

ENGINE / COOLING SYSTEM
21. Apply a thin, continuous film of Crankcase Sealant
(PN 2871557) to sump cover mating surface
not allow sealant to dry before assembly.
NOTICE
Dipstick must be removed before oil pan is assembled
to the engine. Failure to do this will damage the
dipstick.
22. Install the oil sump cover
23. Install the thirteen M6
retain the oil sump cover
3.78
g
. Do
h
onto the crankcase.
j
and three M8 bolts that
k
to the crankcase.
24. Torque the oil sump cover bolts in sequence to
specification. Repeat the sequence to verify final
torque.
TORQUE
Oil Sump Cover Bolts:
M6 Bolts:
9 ft-lb (12 Nm)
M8 Bolts:
26 ft-lb (35 Nm)
25. Reinstall the crankcase drain plug if previously
removed. Torque drain plug to specification.
TORQUE
Crankcase Drain Plug:
22 ft-lbs (30 Nm)
26. Rotate the engine so the cylinder is facing up.
27. Reinstall the oil cooler
new O-rings upon installation
9929422 R02 - 2017-2019 ACE 900 Service Manual
l
, if previously removed. Use
1(
.
© Copyright Polaris Industries Inc.