FINAL DRIVE
10. Loosen and remove the lower A-arm front through-
t
bolt fastener
and rear through-bolt fastener
11. Remove lower shock fastener
12. Using a soft faced hammer, lightly tap on the bearing
carrier while removing the upper joint end.
13. Remove the bearing carrier and lower A-arm from the
front drive shaft.
7.14
y
.
u
from lower A-arm.
14. With a short, sharp jerk, remove drive shaft from the
front gearcase.
9929422 R02 - 2017-2019 ACE 900 Service Manual
© Copyright Polaris Industries Inc.