Polaris ACE 900 2017 Service Manual page 326

FINAL DRIVE
7. Align spring retainer dowel pin
y
dowel pin and install the retainer on top of the
torsion spring.
8. Check the action of the torsion spring by rotating in
both directions to ensure the spring and retainer are
installed properly.
7.36
t
with ring gear 9. Install armature plate
Verify armature plate tabs are in the roll cage slots and
10. Carefully install the ring gear and roll cage assembly
11. Install a new O-ring on the cover plate assembly.
surface. If the O-ring is twisted fluid leakage may occur.
u
plate tabs are fully engaged into the roll cage
assembly and that it is resting properly on the torsion
spring retainer.
NOTICE
that it rests properly on the spring retainer.
i
into the gearcase housing.
NOTICE
Be sure the square O-ring is placed flat on the cover
9929422 R02 - 2017-2019 ACE 900 Service Manual
. Be sure all of the armature
© Copyright Polaris Industries Inc.