Connection Of Wiring And Cables - Eaton Power Xpert UX 12 User Manual

3.5

Connection of wiring and cables

Different types of cables can be connected to the
switchgear for example 1 or 3 core paper lead, XLPE or
synthetic cables.
Ensure that the installation and the cables are
dead.
Wiring and cables must be connected only:
By authorised and qualified personnel;

 In accordance with the data in the information
pack;
In accordance with cable manufacturer's or

cable box supplier's instructions.
In addition to providing for cable connection, the cable
compartment can be used to house other components,
such as:
 Current transformers;
Voltage transformers;

 An earthing switch;
Over voltage surge arrestors;

 Capacitive elements for voltage detection system.
Not all the components mentioned can be accommodated
in the cable compartment at the same time.
The cable compartment is configured for the connection of
one or more cables. For detailed information, go to
par. 3.5.1.
If necessary, the cable gland plate must be provided with
cable cut-outs at site.
WARNING
NOTE
®
Power Xpert UX with W-VACi circuit breaker 6063308 G01 01 14 July 2011 www.eaton.com
System assembly
35