Section 1: Introduction; Purpose; Application And Description; Documentation Reference - Eaton Power Xpert IGX Instruction Booklet

Medium-voltage switchgear
Table of Contents

Advertisement

Instructions for the installation and
commissioning of Power Xpert IGX
medium-voltage switchgear

Section 1: Introduction

1.1. Purpose

This instruction bulletin covers the installation and commissioning
of a Power Xpert IGX compact switchgear assembly. It is not
encompassing of all possible contingencies, variations, and details
that may arise during installation of this equipment.

1.2. Application and description

Eaton's Power Xpert IGX compact switchgear provides centralized
control and protection of medium-voltage power equipment and
circuits in industrial, commercial and utility installations involving
generators, motors, feeder circuits, and transmission and distribution
lines. Eaton's Power Xpert IGX compact switchgear is an integrated
assembly of switches, bus and vacuum circuit breakers. All
structures use single-high breaker arrangements.
Power Xpert IGX uses an isolated-phase design for medium-voltage
components, where all major primary circuit components within
each phase are isolated from each other by grounded metal barriers.
An isolated phase design minimizes the likelihood of arcing faults
and propagation of faults between compartments containing primary
circuit components.

1.3. Documentation reference

Refer to the customer drawing package for order specific
information. For further information on installation and application,
refer to the applicable technical data, publications, and/or industry
standards. Download Eaton electronic information from
com/IGX
(see Table 2).

Table 2. Documentation topics, titles and links

For
Title, Document Number (linked)
General information
Power Xpert IGX 5-38 kV, compact arc-resistant
medium-voltage switchgear Design Guide
DG022022EN
Operation and Maintenance Instructions for the operation and maintenance
of Power Xpert IGX medium-voltage switchgear
IB022024EN
Arc duct installation
Instructions for arc duct installation for Power
Xpert IGX arc resistant medium-voltage switchgear
IB022025EN
Renewal parts
TD022008EN

1.4. Eaton contact information

For additional information about Eaton products please call 1-800-
525-2000 or log onto www.eaton.com. Additional Medium Voltage
Switchgear information regarding Pricing/Aftermarket, Customer
Service, Engineering/Technical Information, or Warranty, can be
obtained by calling 1-800-345-4072.
Eaton Electrical Services and Systems (EESS) can be reached at
1-800-498-2678.
If further information is desired regarding this particular installation
or application information, contact the local Eaton sales office,
reference Eaton's Design Guide, or the appropriate industry
standards.

1.5. Safety precautions

All safety codes, safety standards and/or regulations must be strictly
observed in the installation, operation and maintenance of this
device.
THE WARNINGS AND CAUTIONS INCLUDED AS PART OF THE
PROCEDURAL STEPS IN THIS DOCUMENT ARE FOR PERSONNEL SAFETY
AND PROTECTION OF EQUIPMENT FROM DAMAGE. AN EXAMPLE OF A
TYPICAL WARNING LABEL HEADING IS SHOWN ABOVE TO FAMILIARIZE
PERSONNEL WITH THE STYLE OF PRESENTATION. THIS WILL HELP TO
ENSURE THAT PERSONNEL ARE ALERT TO WARNINGS, WHICH MAY
APPEAR THROUGHOUT THE DOCUMENT. IN ADDITION, CAUTIONS ARE ALL
UPPER CASE AND BOLDFACE AS SHOWN IN THE FOLLOWING PAGES.
COMPLETELY READ AND UNDERSTAND THE MATERIAL PRESENTED IN
THIS DOCUMENT BEFORE ATTEMPTING INSTALLATION, OPERATION
OR APPLICATION OF THE EQUIPMENT. IN ADDITION, ONLY QUALIFIED
PERSONS SHOULD BE PERMITTED TO PERFORM ANY WORK ASSOCIATED
WITH THE EQUIPMENT. ANY WIRING INSTRUCTIONS PRESENTED IN THIS
DOCUMENT MUST BE FOLLOWED PRECISELY. FAILURE TO DO SO COULD
CAUSE PERMANENT EQUIPMENT DAMAGE BODILY INJURY OR DEATH.
www.eaton.
THE POWER XPERT IGX SWITCHGEAR DESCRIBED IN THIS DOCUMENT
ARE DESIGNED AND TESTED TO OPERATE WITHIN THEIR NAMEPLATE
RATINGS. OPERATION OUTSIDE OF THESE RATINGS MAY CAUSE THE
EQUIPMENT TO FAIL, RESULTING IN DEATH, BODILY INJURY AND
PROPERTY DAMAGE.
ALL SAFETY CODES, SAFETY STANDARDS AND / OR REGULATIONS AS
THEY MAY BE APPLIED TO THIS TYPE OF EQUIPMENT MUST BE STRICTLY
ADHERED TO.
Instruction Booklet
Effective April 2023
• WARNING
• WARNING
• WARNING
EATON www.eaton.com/IGX
IB022023EN
Revision #2
7

Advertisement

Table of Contents
loading

Table of Contents