7
Cabling
This chapter provides details on the 4036/2036 switch cable guide brackets installation and
cable management.
7.1
Cabling Guide Bracket Installation
The Cabling Guide brackets (CG-24) are optional; however, it is recommended to use the
Cabling Guide Brackets.
The rack mounted Cabling Guide Brackets (CG-24) should be installed in the back of the rack
itself, facing out.
Rack rails should be free of PDU and power inlets.
Figure 42: Cabling Guide Bracket (CG-24)
To Install the Cabling Guide Brackets (CG-24)
1. Install the Cabling Guide Bracket at the rear of the rack itself, on top or the rail bracket,
using two standard rack screws, as shown in Figure
2. Repeat on the other side.
50
NOTES:
Selecting the optimal InfiniBand cable length depends on the overall cluster configuration and
requires proper planning to produce orderly and maintainable cabling.
The rack space for the 4036/2036 switch should be free from obstructions such as power strips.
7 -2.
Cabling