Communicate:status; Communicate:verbose - Teledyne T3PM1100 User Manual

Find Quality Products Online at:
Example :COMMUNICATE:REMOTE ON
:COMMUNICATE:REMOTE?
->:COMMUNICATE:REMOTE 1

:COMMunicate:STATus

Returns and clears the line-specific status.(Only
Description
for RS-232)
Query Syntax :COMMunicate:STATus?
Return parameter Bit 0
(each status bit) Bit 1
Bit 2
Bit 3 and
higher
Example :COMMUNICATE:STATUS?
->0
• When an event occurs, the corresponding bit is set
Note
in the status.
• When the bit is read, it is cleared.
• Zero is returned for interfaces other than RS-232.

:COMMunicate:VERBose

Sets or returns whether the response to a query is
Description
returned fully spelled out or in its abbreviated
form.
Syntax :COMMunicate:VERBose {<Boolean>|OFF | ON}
Query Syntax :COMMunicate:VERBose?
Parameter <Boolean>0 OFF
<Boolean>1 ON
Return parameter 0
GlobalTestSupply
www.
COMMAND OVERVIEW
Query
Parity error.
Framing error.
Noise error Break character detection.
Always zero.
Set
Query
Turn the verbose function off.
.com
135
sales@GlobalTestSupply.com