Frequency Measurement - Teledyne T3PM1100 User Manual

Find Quality Products Online at:
DC
Select voltage, current, or off
Measurement
In the case of Auto Update Rate, select the voltage or
synchronization source
current from the equipped element.
Line filter Select OFF or ON (cutoff frequency at 500 Hz).
Measures the peak (max, min) value of voltage,
current or power from the instantaneous voltage,
Peak measurement
instantaneous current or instantaneous power that is
sampled.
Removes the internal offset of the measure unit
Zero-level compensation
(After measurement range is changed)
Voltage
Current
Active Power
Apparent Power
Reactive power
Power Factor
Measurement parameters Crest Factor
Phase Angle
Frequency
Voltage Peak
Current Peak
Active Power Peak
Total Harmonic Distortion
Mathematical Computation
Maximum Current Ratio

Frequency Measurement

Item Specifications
Measurement item Voltage and current
Data update interval
0.1 s
0.25 s
0.5 s
Measurement frequency
range
1 s
2 s
5 s
10 s
GlobalTestSupply
www.
APPENDIX
Vrms , Vmn, Vdc , Vac
Irms , Idc , Iac
P
VA
VAR
PF
CFI,CFV
DEG
IHz and VHz
V+pk and V-pk
I+pk and I-pk
P+pk and P-pk
THDI and THDV
MATH
MCR
Measurement Frequency Range
20 Hz ≤ f ≤ 100 kHz
10 Hz ≤ f ≤ 100 kHz
5 Hz ≤ f ≤ 100 kHz
2.0 Hz ≤ f ≤ 100 kHz
1.0 Hz ≤ f ≤ 100 kHz
0.5 Hz ≤ f ≤ 100 kHz
0.2 Hz ≤ f ≤ 100 kHz
205
.com
sales@GlobalTestSupply.com