Teledyne T3PM1100 User Manual page 6

Find Quality Products Online at:
Safety Guidelines
Make sure that the voltage input level does not
General Guideline

exceed AC600V.
CAUTION
Make sure the current input level does not

exceed 20A.
Do not place any heavy object on the

instrument.
Avoid severe impact or rough handling that can

lead to damaging the instrument.
Do not discharge static electricity to the

instrument.
Use only mating connectors, not bare wires, for

the terminals.
Do not block or obstruct the cooling fan vent

opening.
Do not perform measurement at the source of a

low-voltage installation or at building
installations (Note below).
Do not disassemble the instrument unless you

are qualified as service personnel.
Make sure that the COM terminal to earth is

limited to 600Vpk.
Remove all test leads before disconnecting the

mains power cord from the socket.
If the equipment is used in a manner not

specified by the manufacturer, the protection
provided by the equipment may be impaired.
The device should be placed in a way that the

plug connected to it can be removed easily.
6
GlobalTestSupply
www.
T3PM1100 User Manual
.com
sales@GlobalTestSupply.com