Input:current:pojump; [:Input]:Current:extsensor:config<X - Teledyne T3PM1100 User Manual

Find Quality Products Online at:
Example :INPUT:CURRENT:CONFIG 20,10,1
:INPUT:CURRENT:CONFIG?
->:INPUT:CURRENT:CONFIG 20.0E+00,10.0E+00,
1.0E+00
[:INPut]:CURRent:POJump
Sets or returns the jump destination range that is
Description
used when a current peak over-range occurs.
Syntax [:INPut]:CURRent:POJump {OFF|<Current>}
Query Syntax [:INPut]:CURRent:POJump?
Parameter/ OFF
Return parameter
<Current > See(:INPut:CURRent:RANGe).
Example :INPUT:CURRENT:POJUMP 20A

:INPUT:CURRENT:POJUMP?

->:INPUT:CURRENT:POJUMP 20.0E+00
[:INPut]:CURRent:EXTSensor:CONFig<x>
Sets or returns the valid external current sensor
Description
range.
Syntax [:INPut]:CURRent:EXTSensor:CONFig<x>
{ALL|<Voltage>[,Voltage]...}
Query Syntax [:INPut]:CURRent:EXTSensor:CONFig<x>?
Parameter/ <x>
Return parameter
ALL
<Voltage>
GlobalTestSupply
www.
COMMAND OVERVIEW
Set
Query
No jump destination current range.
Set
Query
1,2(EXT1,EXT2), If <x> is omitted, by
default sets or returns EXT2 config.
All ranges are valid.
See(:INPut:CURRent:RANGe).
.com
151
sales@GlobalTestSupply.com