Teledyne T3PM1100 User Manual page 97

Find Quality Products Online at:
MEASUREMENT AND OTHER FUNCTIONS
Take few examples below that derive from the table
above for further descriptions.
 When Update Time is set 20s, the range of Time
Div is from 5ms to 1s and the available
Frequency is up to 50Hz.
 When Update Time is set 0.1s, the range of
Time Div is from 25us to 5ms and the available
Frequency is up to 10kHz.
 The maximum frequency for Graph mode is
Note
up to10kHz.
 When the measured frequency of either
voltage (VHz) or current (IHz) surpasses
the available frequency, which is based on
the set Time Div, the warning message will
be shown accordingly.
GlobalTestSupply
www.
97
.com
sales@GlobalTestSupply.com