Specifications; General Specifications - Teledyne T3PM1100 User Manual

Find Quality Products Online at:

Specifications

Below are the basic conditions required to operate the T3PM1100
within specification:
Calibration: Yearly

18~28 ˚C (64.4~82.4˚F)
Operating Environment:

Humidity: <80%RH,

Accuracy: ± (% of reading + % of range)

The specifications apply when the unit is warmed up for at least

30 minutes and operates in the slow rate.
The power supply cable must be grounded to ensure accuracy.

Input voltage and current must be standard sine wave.

The power factor must be 1.

The crest factor must be 3.

The common-mode voltage must be zero.


General Specifications

Specification Conditions:
Temperature: 23˚C±5˚C
Humidity: <80%RH(non-condensing)
Operating Environment: (0~40˚C)
Temperature Range: 30~40˚C, Relative Humidity: <70%RH(non-condensing);
>40˚C, Relative Humidity: <50%RH(non-condensing)
Indoor use only
Altitude: <2000 meters
Pollution degree 2
Storage Conditions (-40~70˚C)
Humidity: <90%RH(non-condensing)
General:
Power Source: 100-240 VAC 50/60Hz
Power Consumption: Max 30VA
Bench Dimensions: 268 mm (W) X 107 mm (H) X 379 mm (D) (w/t bumpers)
Weight: Approximately 2.9 kg
GlobalTestSupply
www.
APPENDIX
199
.com
sales@GlobalTestSupply.com