Alarm Pre-Silence; Alarm Message Window - Respironics BiPAP Focus Operator's Manual

Alarms

Alarm Pre-silence

Press ALARM SILENCE when no alarms are active to silence any alarm
that may occur in the two minutes following the key press. Alarm Pre-
silence is useful for avoiding nuisance alarms during certain procedures.
A new alarm will not sound if Alarm Pre-silence is active.
Press ALARM RESET when Alarm Pre-silence is no longer required.

Alarm Message Window

An alarm message window appears when an alarm occurs (Figure 29).
The window can display up to three alarm messages in order of priority.
Figure 29: Alarm Message Window
®
48 BiPAP Focus™ Noninvasive Ventilator System
1027404 Rev K