Respironics BiPAP Focus Operator's Manual page 41

Table 2: BiPAP Focus System Front Panel Controls
English
®
BiPAP Focus™ Noninvasive Ventilator System
1027404 Rev K
Int'l Description
ALARM indicator shows if an alarm is active
(flashing) or auto-reset (steadily lit indicator).
NOTE: In STANDBY mode only, an active
ALARM LED indicates a missing or faulty battery
or a charging circuit fault.
ALARM RESET clears active and auto-reset
alarms or cancels an alarm silence.
ALARM SILENCE mutes the audible alarm for
2 minutes. Each key press restarts the 2-minute
interval. The indicator lights (yellow) when alarm
silence is active.
Alarm presilence: press when no alarm is active
for two minutes of silence.
AC indicator lights (green) to show that the
system is powered by AC (mains) power.
Battery Status lights to show if the system is
powered by battery power (yellow) or the battery
charge cycle is active during AC operation
(green). The green indicator turns off when the
battery is fully charged during AC operation.
STANDBY turns the system ON or puts the unit
into Standby mode. Standby mode allows the
internal battery to charge.
UP and DOWN arrow keys navigate the on-
screen buttons or adjust values.
Operation
35