Mercedes-Benz Metris Operator's Manual page 79

A A djus djusting headlam ting headlamp r p range ange
Turn headlamp range adjuster
#
required position.
If the vehicle is unladen, select position g.
#
The illumination of the road should be 131
(40 m) to 328 (100 m) and the low beam must
not blind oncoming tra c.
You can use the headlamp range adjuster to adjust
the light cone of the headlamps to your vehicle's
load condition. As the seats are occupied or the
cargo compartment is loaded or unloaded, the
light cone changes. This may cause visibility condi-
tions to deteriorate and you could blind oncoming
tra c.
Oper Operating t ating the combination switc he combination switch f h for lights
1
High beam
2
Right turn signal light
3
Headlamp ashing
4
Le turn signal light
Use the combination switch to select the
#
desired function.
Switching on high beam Switc hing on high beam
Switch on the low beam (
#
Push the combination switch forwards 1.
#
The K indicator lamp on the instrument
cluster will light up.
%
In the à position, the high beam switches
on only in darkness and when the vehicle is
switched on.
T T o switc o switch h o :
#
back to its starting position.
The K indicator lamp goes out on the
instrument cluster.
Headlam Headlamp p ashing
1 to the
Brie y pull the combination switch in the direc-
#
tion of arrow 3.
T T ur urn signal light n signal light
T T o indicat o indicate: e: push the combination switch in the
#
required direction
the case of larger steering movements, the
combination switch will reset itself automati-
cally.
T T o indicat o indicate e br brie y:
#
brie y in the required direction
corresponding turn signal lamp will ash three
times.
or lights
Switching t Switc hing the hazar
& W W ARNING
cealed lighting systems
If you open the rear-end doors by 90°, the rear
lighting installations will be concealed.
Other road users will then not be able to see
the vehicle, or will see it only with di culty.
Therefore, in these or similar situations, safe-
guard the vehicle in accordance with national
regulations, e.g. with a warning triangle.
Light and vision
page 76).
/
o : move the combination switch
ashing
2 or 4 until it engages. In
ie y: tap the combination switch
2
he hazard w d war arning light syst ning light system
ARNING Risk of accident due to con-
77 77
or 4. The
em on/o on/o