Mercedes-Benz Metris Operator's Manual page 140

138 Instrument cluster and on-board computer
138
Display (example)
1
Time
2
Ä Active Brake Assist (
j Active Parking Assist (
ë HOLD function (
/
3
Constant display: outside temperature or
speed ( page 146)
/
75 mph (120 km/h)! (for certain countries
only) Maximum permitted speed exceeded
4
Menu bar
Outside temperature (only if header
the additional speedometer)
5
Comfort display ( page 103)
/
6 Transmission position (
/
7
Status area
8 Display section for display messages, menus
and menu bar
9
Header
You can call up menu bar 4
by pressing the = or ; steering-wheel but-
ton. It will automatically disappear again a er a
few seconds.
Display section 8 shows the selected menu or
submenu as well as display messages.
In status area 7, the display can show the status
of the following driving systems:
À ATTENTION ASSIST (
/
à Lane Keeping Assist (
¯ Cruise control (
page 113)
/
è Rear window wiper (
/
A A djus djusting t ting the ins he instr trument lighting ument lighting
& W W ARNING
ARNING Risk of accident and injury dur-
ing intervention by the steering wheel
If you reach through the steering wheel to
operate the adjustment knobs while driving,
you could lose control of the vehicle.
page 111)
/
page 122)
/
page 118)
Brightness control (example: vehicle with steering-
wheel buttons)
The displays on the instrument cluster are illumina-
ted during the day. A dimming function is not pos-
sible in daylight.
9 shows
In vehicles with steering-wheel buttons, the light
sensor on the instrument cluster automatically
controls the brightness of the display lighting.
When the light has been switched on, the bright-
page 103)
ness control is in uenced by the ambient light. You
can then adjust the brightness of the instrument
lighting and the display lighting as well.
V V ehicles wit
#
in the display section
%
V V ehicles wit
#
page 125)
page 127)
/ Ov Over ervie
V V ehicles wit
page 85)
Press the È button on the instrument cluster to
scroll through the menus.
You will see the
stationary.
If you scroll forwards in the
the 3 button, the settings for the previous sub-
menu or the previous function will be copied over.
If you press the È button in a submenu, the sub-
menu or function will be exited without the setting
being adopted.
Use the adjustment knobs only when the
#
vehicle is at a standstill.
Do not reach through the steering wheel
#
while driving.
ehicles without st hout steer eering-wheel butt ing-wheel buttons:
Press the f or g button on the instrument
cluster.
If the Settings menu has been selected on the
on-board computer, it will not be possible to
adjust the display brightness.
ehicles with st h steer eering-wheel butt ing-wheel buttons:
Turn brightness control 1
cluster.
view of menus on t w of menus on the on-boar he on-board com
ehicles without st hout steer eering-wheel butt ing-wheel buttons
Settings menu only if the vehicle is
Settings
ons:
ons:
on the instrument
d comput puter er
ons
menu using