Mercedes-Benz Metris Operator's Manual page 242

240 Technical data
240
* N N O O TE TE Engine damage caused by an incor-
rect oil lter, incorrect oil or additives
Do not use engine oils or oil lters other
#
than those which meet the speci cations
necessary for the prescribed service
intervals.
Do not alter the engine oil or oil lter in
#
order to achieve longer change intervals
than prescribed.
Do not use additives.
#
Have the engine oil changed a er the
#
prescribed intervals.
Mercedes-Benz recommends having the oil
changed at a quali ed specialist workshop.
Further information on engine oil and oil lter:
In the MB Speci cations for operating uids at
R
https://bevo.mercedes-benz.com (by entering
the designation)
At a quali ed specialist workshop
R
Quality and capacity of engine oil Quality and capacity of engine oil
MB-Fr MB-Freig eigabe orMB- abe orMB-Approv Approval al
Models Models
All models
1 Recommended for lowest possible fuel consumption (lowest SAE
viscosity class in each case; observe possible restrictions of the
approved SAE viscosity classes).
To achieve the lowest possible fuel consumption, it
is recommended to use the engine oil speci ca-
tions marked in the table for the lowest SAE vis-
cosity class. Observe any possible restrictions of
the approved SAE viscosity classes.
If the engine oils listed in the table are not availa-
ble, you may add a maximum of 1.1 US qt
(1.0 liter) of the engine oils with MB-Freigabe or
MB-Approval 229.3 or ACEA A3/B4.
Engine oil lling Engine oil lling capacity capacity
Engine oil
T T r r ansmission oil
A A ut utomatic tr
Oper Operating
You can obtain further information at a quali ed
specialist workshop.
R R ear axle
Oper Operating
MB-Fr MB-Freig eigabe orMB- abe orMB-
Approv Approval al
You can obtain further information at a quali ed
1
229.5, 229.6
specialist workshop.
N N o o t t es on br
Observe the notes on operating uids
(
/
& W W ARNING
Approx. 2 US gal
(7.7 liters)
* N N O O TE TE Damage to paint, plastic or rubber
ansmission oil
omatic transmission ansmission
ating uid: uid: aut automatic tr omatic transmission ansmission uid
Pr Product descr oduct descrip iption/ tion/ Maint Maintenance int
number number
Mobil ATF 134 FE -
Valvoline ATF Pro
236.15
MB Sheet Number
236.15
ear axle
ating uid: uid: tr transmission oil ansmission oil
Pr Product descr oduct descrip iption/ tion/ Maint Maintenance int
number number
Mobilube FE 75W-85 -
Mobilube FE Plus NG
75W-85
MB Sheet Number
235.7
es on brak ake e uid uid
page 238).
ARNING Risk of an accident due to
vapor pockets forming in the brake system
The brake uid constantly absorbs moisture
from the air. This lowers the boiling point of the
brake uid. If the boiling point is too low, vapor
pockets may form in the brake system when
the brakes are applied hard.
This causes the braking e ect to be impaired.
Have the brake uid renewed at the
#
speci ed intervals.
by brake uid
There is a risk of damage to property if brake
uid comes into contact with paint, plastic or
rubber.
uid
enance interv erval al
enance interv erval al