Mercedes-Benz Metris Operator's Manual page 243

If paint, plastic or rubber comes into con-
#
tact with brake uid, rinse with water
immediately.
Observe the notes on paintwork/matte nish
paintwork care ( page 181).
/
Have the brake uid renewed every two years at a
quali ed specialist workshop.
Only use brake uid approved by Mercedes-Benz in
accordance with MB-Freigabe or MB-Approval
331.0.
Information on brake uid is available at the follow-
ing locations:
In the MB Speci cations for operating uids
R
331.0
At https://bevo.mercedes-benz.com
-
In the BeVo app
-
At a quali ed specialist workshop
R
Coolant Coolant
N N o o t t es on coolant es on coolant
Observe the notes on operating uids
( page 238).
/
& W W ARNING
ARNING Risk of Fire and injury due to
antifreeze
If antifreeze comes into contact with hot com-
ponents in the engine compartment, it may
ignite.
Allow the vehicle to cool down before
#
re lling with antifreeze.
Make sure that antifreeze does not spill
#
out over the ller neck.
Before starting the vehicle, thoroughly
#
clean the components contaminated with
antifreeze.
* N N O O TE TE Damage caused by incorrect cool-
ant
Only add coolant that has been premixed
#
with the required antifreeze protection.
Information on coolant is available at the following
locations:
In the MB Speci cations for operating uids
R
320.1
At https://bevo.mercedes-benz.com
-
In the BeVo app
-
At a quali ed specialist workshop
R
* N N O O TE TE Overheating at high outside temper-
atures
If an inappropriate coolant is used, the engine
cooling system is not su ciently protected
against overheating and corrosion at high out-
side temperatures.
Always use coolant approved for
#
Mercedes-Benz.
Observe the instructions in the MB Spec-
#
i cations for operating uids320.1.
* N N O O TE TE Paintwork damage due to coolant
Do not spill coolant on painted surfaces.
#
Have the coolant regularly replaced at a quali ed
specialist workshop.
Note the proportion of anti-corrosion agent/anti-
freeze in the engine cooling system within the fol-
lowing temperature ranges:
A minimum of 50% (antifreeze protection down
R
to about -35°F (-37°C))
A maximum of 55% (antifreeze protection down
R
to -49°F (-45°C))
Coolant capacities Coolant capacities
Engine cooling system Engine cooling syst em
Model Model
All models
W W indshield w indshield washer asher uid uid
N N o o t t es on windshield w es on windshield washer asher uid
Observe the notes on operating uids
( page 238).
/
& W W ARNING
ARNING ‑ Risk of re and injury from
windshield washer concentrate
Windshield washer concentrate is highly am-
mable. It could ignite if it comes into contact
Technical data 241
241
Capacity Capacity
Approx. 11 US qt
(10.4 l )
uid