Seats - Mercedes-Benz Metris Operator's Manual

Seats and stowage
66 66
Fold the armrest upwards more than 45° in
#
position 2.
The armrest will be unlocked.
Fold the armrest forwards 3 as far as it will
#
go.
Slowly fold the armrest upwards into the
#
required position.
T T o f o fold t old the ar he armr mres est upw t upwar ards:
#
the armrest upwards more than 90° in position
1.
R R ear benc ear bench seats h seats
N N o o t t es on t es on the r he rear seats ear seats
Benc Bench seat anc h seat anchor horage age
& W W ARNING
ARNING Risk of accident and injury as a
result of rear bench seat not being
engaged
If the rear bench seat is not engaged, it may be
ung around during travel.
Always make sure that the rear bench
#
seat is engaged as described.
Keep the seat anchorages in the vehicle oor free
of dirt and objects at all times to ensure that the
seat engages securely.
If the indicator tab of the seat anchorages is not
retracted into the seat leg, the seat is not correctly
engaged. Engage the seat again.
Example: seat rail system with quick-locking mech-
anism
Guide rails 1 for the seat rail system can be used
to mount up to two rear bench seats in two rows.
%
V V ehicles wit ehicles with seat r h seat rail syst ail systems:
remove a rear bench seat, the seat slider may
slide into a guide rail. The seat sliders will then
no longer be parallel in the guide rails. In this
case, you will no longer be able to install the
rear bench seat. The seat sliders must be
moved only using a special tool or at a quali-
ds: if necessary, fold
Seat anchorages with quick-locking mechanism
(example: three seat anchorages per row of rear

seats)

You can secure rear bench seats in seat ancho-
rages 2. If your vehicle is equipped with four seat
anchorages on the rst rear seat row, the rear
bench seats can be mounted facing one another.
seating var ariants seating v
& W W ARNING
If the rear bench seats are incorrectly installed,
the integrated safety precautions in the rear
bench seats cannot work as intended.
#
#
Depending on the type of seat anchorage in the
vehicle oor, you can install the following seating
variants:
R
R
Depending on the vehicle equipment, you can
install the rear bench seats in the rst and/or sec-
ond rear seat row.
The seating variants shown are permitted only if
the conditions speci ed below for safe rear seating
are met. Other seating variants are not permitted
and may endanger the occupants.
ems: When you
ed specialist workshop in order to prevent
the risk of damage. The tool is available as a
Mercedes-Benz accessory.
iants
ARNING Risk of injury due to incorrect
installation of the rear bench seats
Install the rear bench seats only as
described.
Only use rear bench seats approved for
your vehicle.
rear bench seats with two or three seats
Seat/bunk combination with three seats