Dynamic Back - Physipro NEOX Tilt-in-Space Owner's Manual

ENGLISH
8.2 Dynamic Backrest Installation
Follow these instructions to replace a standard back width a dynamic back:
1. Remove the armrests and the wheels;
2. Remove the backrest ;
Unscrew bolt A to remove the back posts;
3.
Remove the armrest hardware B, screw C and screw H on the small tube;
4.
Remove bolt D;
5.
Using a flat punch remove sleeves E to release the plate. ;
6.
Figure 21: Dynamic Backrest Installation
E
Figure 22: Dynamic Backrest Installation
22
NEOX™ Tilt-in-Space
Flat Punch