Owners manual
8. Backrest
8.1 Back Angle Modification
The XL5 / XL5 CI wheelchair back angle can be
adjusted to satisfy your client's needs.
To do so, follow these instructions:
1.
Unscrew screw A with two 10 mm wrenches
2.
Once the screw has been removed, modify the
angle to meet your client's needs.
3.
When the desired angle is reached put the
screw A in one of the preset holes.
4.
Tighten
Note: There is a 5º angle between every hole position.
8.2 Dynamic Backrest Installation
Follow these instructions to replace a standard back by a dynamic back:
1.
Remove the armrests and the wheels;
2.
Remove the backrest ;
Unscrew bolt A to remove the back posts;
3.
Figure 20: Dynamic Backrest Installation
23
ENGLISH
A
Figure 19 : Back Angle Modification
A
Revision 5
December 2015