Seat Width - Physipro SPIRAL Owner's Manual

Owners manual

4.3 Seat width :

The seat width of the Spiral tilt in space wheelchair can be changed by adjusting the crossbars.
There are two possible configurations, the standard frame: 10" to 13" (25.4 to 33 cm) and the
wide frame: 13" to 16" (33 to 40,6 cm). The width adjustment of the Spiral is done in increments
of 1" (2,5 cm)
Modifing the seat width :
1. Remove the seat plate :
(See section:4.2);
2. Adjusting the seat frame and
seat:
a. Unscrew the bolts (H) from
the transversal bars and the
bolts (I) from the seat;
b. Simultaneously widen or
shrink the frame and seat to
the desired position;
c. Tighten the bolts (H) and (I)
3. Adjusting the seat plate :
(See section: 4.2);
4. Adjusting the tension bar :
(See section: 4.14);
5. Adjusting the angle adjustable
push handle:
(See section : 4.13);
6. Adjusting the one-piece
footplate:
(See section : 0);
Note – width adjustment may require components of a standard or wide frame. For further
details, you're invited to contact us or consult the order form.
Figure 25 : Adjusting the seat width
25
25
ENGLISH
Révision 0
juillet 18
Revision 1
July 2018