Attendant Wheel Lock - 4 Wheel Option - Physipro NEOX Tilt-in-Space Owner's Manual

Owners manual
Never stop a moving wheelchair with wheel locks. Wheel locks are not
brakes.
When breaks are applied, the breaking stop must sink into the tire by
" to ¼".
1/8
It is important to adjust the brakes if modifications of the rear wheels are
done or if the tires are worn out.
Ensure that all the nuts are securely fastened after each adjustment.
13.4 Attendant Wheel Lock – 4 wheel
option
Adjust A and B according to the
1.
frame structure E by inserting
them on the tube C.
2. Center tube C and firmly tighten
screw D using a 10 mm Wrench.
3. Position and adjust the foot
operated brake F on the frame
structure E by tightening bolts
G and nuts H with transit I.
Figure 51: Attendant Wheel Lock
F
E
4 wheels
A
Figure 50: Attendant Wheel Lock 4
I
Figure 52: Attendant Wheel Lock
37
ENGLISH
D
C
D
B
wheels
G
H
4 wheels
Revision 3
Janvier 2015