Table of Contents
Advertisement
Owners manual
11. Footrests
11.1 Swing-in/swing-out footrests
1.
Place the footrest into the receiver on front
frame tube with the footrest facing outward
from the frame;
2.
Rotate the footrest inward until it locks into
place on locking bolt;
To swing-out, press handle A to unlock the
3.
footrest and rotate outward.
11.2 Height adjustment
To modify the length of the footrests,
please follow these steps:
Remove screw A using a 10 mm
1.
wrench;
2.
Slide footrest extension up or down
inside the frame tube to the desired
height;
Replace screw A, tighten.
3.
11.3 Angle Adjustment
With a 5 mm Allen key, loosen screw A (about ½ turn) ;
1.
2.
Turn the footplate around the footrest mechanism to adjust the footplate
to desired angular position;
3.
Re-tighten screw A once the adjustment is done.
11.4 Depth Adjustment
1.
With a 5 mm Allen key,
loosen screw A ;
2.
For a depth adjustment,
slide forward or backward
the footrest on its rail;
Re-tighten screw A once the
3.
adjustment is done.
Figure 54 : Footrest Height Adjustment
37
ENGLISH
Figure 53 : Swing-out Footrests
Figure 55 : Footplate Adjustment
Revision 5
January 2016
Advertisement
Table of Contents
