Owners manual
6.5 Rear Wheel Lateral Adjustment
This modification is used to move the rear wheels closer or further from the
frame.
To do so, follow these instructions:
1.
Remove the rear wheel (refer to section 6.2 ; 6.3);
Untighten nut A to release the positioning device B with the use of a 1
2.
wrench;
3.
Unscrew or screw the positioning device B in or out in order to obtain the
desired position;
Firmly tighten nut A with the use of a 1
4.
5.
Re-install the rear wheel.
B
Figure 15 : Outermost Position of the Wheel
After any adjustments, make sure all attaching hardware is tightened securely
– otherwise injury or damage may occur.
A
17
1/8
" wrench;
Figure 16 : Innermost Position of the Wheel
ENGLISH
1/8
"
Revision 3
Janvier 2015