Owners manual
6.5 Rear Wheel Lateral Adjustment
This modification is used to move the rear wheels closer or further from the
frame. To do so, follow these instructions :
1.
Remove the rear wheels, refer to section 6.1
Untighten nut A and B to release the positioning device C with the
2.
use of a 1
3.
Unscrew or screw nut A and B to move the positioning device in or out.
Tighten nut A and B with the 1
4.
5.
Reinstall the rear wheel.
B
C
After any adjustments, make sure all attaching hardware is tightened
securely – otherwise injury or damage may occur.
1/8"
wrench.
A
Figure 17 : Rear wheel Lateral Adjustement
1/8"
wrench.
Innermost Position
of the Wheel
Outermost Position
of the Wheel
21
ENGLISH
Revision 5
December 2015